Bitumen Modification Equipment UMB-4

APPLICATION

The bitumen modification unit UMB-4 (referred to as the unit) is designed to produce polymer-modified bitumens. The bitumens are in accordance with all applicable standards.

Modified bitumen is used in road and bridge construction and repair.

The unit can be used by asphalt and road top producers, roofing and building hydro-insulation companies.

The unit can be used outdoors as well as indoors in a suitably ventilated space.

The design of the unit provides for operational readiness under temperature range from +5С to +40С.

SPECIFICATIONS

No

Parameter

Value

1

Maximum capactiy, m³/hour,

4

2

Amount of polymer per 1 m³ of bitumen, kg

10…25

3

Operation mode

Cyclic/interchange

4

Number of reactors

2

5

Reactor volume, m³

2

6

Rated power, kW

-mill

45

-bitumen feed pump

5,5

-feed/discharge pump

11,0

-mixer drive

15

-heat-conductor heater total power

100

-heat conductor feed pump

4

-control system

0,5

-total

181

7

Dimensions, mm,

-length

5000

-width

2200

-height

3000

8

Weight, kg

ХХХХ

SET OF DELIVERY

No

Name

Amount, pcs

1

Bitumen modification system UMB-4, assembled.

1

2

Documentation:

-Manual for UMB-4

1

-Manual for 2ТРМ controller

1

*According recipe

As per customer request, these units can be equipped with a wide range of electronic devices to simplify the process of emulsion production.

Control of all operations is displayed on a screen, fitted on the electric control panel.

Flow diagram UMB-4

bitumen_modification_shem

 

обновлено: June 29, 2016 автором: globecore