{"id":4883,"date":"2024-02-12T14:28:01","date_gmt":"2024-02-12T14:28:01","guid":{"rendered":"https:\/\/modified.globecore.com\/?page_id=4883"},"modified":"2024-02-12T14:28:01","modified_gmt":"2024-02-12T14:28:01","slug":"colloid-mill-clm-2-4","status":"publish","type":"page","link":"https:\/\/modified.globecore.com\/colloid-mill-clm-2-4\/","title":{"rendered":"Colloid mill CLM-2\/4"},"content":{"rendered":"
\n
\n
\n

The CLM-2\/4 colloid mill is engineered for inline homogenization and emulsification of liquid products, specifically designed to handle thick slurries subjected to high shear stresses, with a primary focus on preparing bitumen emulsions.<\/p>\n

While its core function revolves around bitumen emulsion production, this versatile mill finds acceptance across various industries for the preparation, dissolution, and processing of a wide array of products.<\/p>\n

Operational Principle<\/h3>\n

The operation of the CLM-2\/4 colloid mill hinges on a rotor\/stator system configuration. Within this setup, both the rotor and stator comprise concentric tool rings, featuring specialized configurations of grooves and holes aimed at optimizing the mechanical impact on the processed product.<\/p>\n

During operation, the tool rings of the rotor (the moving component) and the stator (stationary component) align coaxially and rotate contact-free at a high relative speed, reaching up to 45 m\/s. This contact-free rotation is maintained through precise axial and radial gaps engineered for technological purposes.<\/p>\n

The processed product enters the mill’s operating chamber through the axial bore of the stator, serving as the product inlet. It then traverses through the rotor\/stator system and is discharged radially through the product outlet.<\/p>\n

As the product passes through the rotor\/stator system, it undergoes intricate hydrodynamic processes characterized by variations in shear stresses, shear forces, and flow velocity. These conditions accelerate chemical reactions by increasing the contact surfaces of chemical agents, facilitating intensive dispersion, emulsification, homogenization, grinding, and pulverization of the processed product.<\/p>\n

SPECIFICATIONS<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u2116<\/b><\/td>\nParameter<\/b><\/td>\n\n

Value<\/b><\/p>\n<\/td>\n<\/tr>\n

1<\/td>\nUnit capacity, m3<\/sup>\/h (gpm)<\/td>\n\n

2\u20264 (8.8\u2026 17.6)*<\/p>\n<\/td>\n<\/tr>\n

3<\/td>\nOperating temperature, \u00b0\u0421 (\u00b0F), not more than<\/td>\n\n

150 (302)<\/p>\n<\/td>\n<\/tr>\n

4<\/td>\nMaximum pressure, bar (psi), not more than<\/td>\n\n

10 (145)<\/p>\n<\/td>\n<\/tr>\n

5<\/td>\nProduct operating volume, L<\/td>\n\n

flow<\/p>\n<\/td>\n<\/tr>\n

6<\/td>\nShaft seal type<\/td>\n\n

packing<\/p>\n<\/td>\n<\/tr>\n

7<\/td>\nRotor\/stator tooling type<\/td>\n\n

nozzle<\/p>\n<\/td>\n<\/tr>\n

8<\/td>\nReplaceable knife kit<\/td>\n\n

optional<\/p>\n<\/td>\n<\/tr>\n

9<\/td>\nKnife axial gap (preset), mm<\/td>\n\n

0.5\u20261.5 (2\u00b710-2<\/sup>\u20266\u00b710-2<\/sup>\u00a0)<\/p>\n<\/td>\n<\/tr>\n

10<\/td>\nKnife radial gap, mm (in)<\/td>\n\n

0.25 (10-3<\/sup>)<\/p>\n<\/td>\n<\/tr>\n

11<\/td>\nKnife tip speed, m\/s (mph), not more than<\/td>\n\n

45 (100)<\/p>\n<\/td>\n<\/tr>\n

12<\/td>\nMill shaft and bearing rotation speed, rpm<\/td>\n\n

6,350<\/p>\n<\/td>\n<\/tr>\n

13<\/td>\nElectric motor shaft rotation speed, rpm<\/td>\n\n

2,900<\/p>\n<\/td>\n<\/tr>\n

14<\/td>\nDrive power, kW<\/td>\n\n

11<\/p>\n<\/td>\n<\/tr>\n

15<\/td>\nPower voltage, V<\/td>\n\n

custom<\/p>\n<\/td>\n<\/tr>\n

16<\/td>\nDimensions, mm (in), not more than:<\/td>\n<\/td>\n<\/tr>\n
-length<\/td>\n\n

900 (35)<\/p>\n<\/td>\n<\/tr>\n

\u2013\u00a0wi<\/b>dth<\/td>\n\n

580 (23)<\/p>\n<\/td>\n<\/tr>\n

-height<\/td>\n\n

450 (18)<\/p>\n<\/td>\n<\/tr>\n

17<\/td>\nWeight, not more than, kg (lb)<\/td>\n\n

190 (420)<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0<\/b>* \u2013 depending on the product (liquid).<\/p>\n

ADVANTAGES<\/h2>\n
\n
\n
\n