{"id":4889,"date":"2024-02-12T14:43:43","date_gmt":"2024-02-12T14:43:43","guid":{"rendered":"https:\/\/modified.globecore.com\/?page_id=4889"},"modified":"2024-02-12T14:46:01","modified_gmt":"2024-02-12T14:46:01","slug":"colloid-mill-clm-8-16","status":"publish","type":"page","link":"https:\/\/modified.globecore.com\/colloid-mill-clm-8-16\/","title":{"rendered":"Colloid mill CLM-8\/16"},"content":{"rendered":"
\n
\n
\n

The CLM-8\/16 colloid mill is engineered for inline homogenization and emulsification of liquid products, particularly thick slurries with high shear stresses.<\/p>\n

This mill finds extensive use in various industries, especially in grinding granulated SBS-polymer for modified bitumen preparation.<\/p>\n

Principle of Operation<\/h3>\n

The CLM-8\/16 colloid mill operates on a rotor\/stator system diagram, comprising concentric tool rings (cutters, knives) on the rotor and stator with specialized grooves and holes to optimize mechanical impact on the processed product. In operation, the rotor and stator tool rings rotate coaxially at high speed (up to 47 m\/s) without contact, facilitated by axial and radial gaps. Processed product enters the mill housing through the stator’s axial bore (product inlet), passes through the rotor\/stator system, and exits radially (product outlet). During passage through the rotor\/stator system, the product undergoes complex hydrodynamic processes, altering shear stresses, forces, and flow velocity, leading to accelerated chemical reactions and resulting in intensive dispersion, emulsification, homogenization, grinding, and pulverization of the product.<\/p>\n

SPECIFICATIONS<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/b><\/td>\n\n

Value<\/b><\/p>\n<\/td>\n<\/tr>\n

Mill capacity, m3<\/sup>\/h (gpm)<\/td>\n\n

8\u2026 16 (35\u2026 70)*<\/p>\n<\/td>\n<\/tr>\n

Kinematic viscosity of product, mm2<\/sup>\/s (St), not more than<\/td>\n\n

150 (1.5)<\/p>\n<\/td>\n<\/tr>\n

Initial size of polymer particles, mm (in), not more than<\/td>\n\n

5 (0.2)<\/p>\n<\/td>\n<\/tr>\n

Maximum operating pressure, MPa (psi)<\/td>\n\n

0.6 (87)<\/p>\n<\/td>\n<\/tr>\n

Rated rotation frequency, rpm<\/td>\n\n

2,950<\/p>\n<\/td>\n<\/tr>\n

Drive motor power, kW<\/td>\n\n

75<\/p>\n<\/td>\n<\/tr>\n

Parameters of electricity mains, V\/Hz<\/td>\n\n

custom<\/p>\n<\/td>\n<\/tr>\n

Nominal bore diameter of mill fittings, mm (in)<\/p>\n

\u2013 inlet<\/p>\n

\u2013 outlet<\/td>\n

 <\/p>\n

120 (4.7)<\/p>\n

80 (3.1)<\/p>\n<\/td>\n<\/tr>\n

Operating temperature, \u00b0\u0421 (\u00b0F), not more than<\/td>\n\n

180 (356)<\/p>\n<\/td>\n<\/tr>\n

Mill shaft seal<\/td>\n\n

packing<\/p>\n<\/td>\n<\/tr>\n

Knife gap adjustment type<\/td>\n\n

manual<\/p>\n<\/td>\n<\/tr>\n

Knife gap adjustment range, mm (in)<\/td>\n\n

0,2\u20262 (8\u00b710-3<\/sup>\u2026 8\u00b710-3<\/sup>)<\/p>\n<\/td>\n<\/tr>\n

Knife tip speed at 3,000 rpm, m\/s (mph), not more than<\/td>\n\n

47 (105)<\/p>\n<\/td>\n<\/tr>\n

Dimensions (not more than), mm (in):<\/p>\n

\u2013 length<\/p>\n

\u2013 width<\/p>\n

\u2013 height<\/td>\n

 <\/p>\n

1,690 (67)<\/p>\n

650 (26)<\/p>\n

770 (30)<\/p>\n<\/td>\n<\/tr>\n

Net weight (not more than), kg (lb)<\/td>\n\n

780 (1,720)<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0<\/b>* \u2013\u00a0 depending on the product (liquid).<\/p>\n

ADVANTAGES<\/h2>\n
\n
\n
\n