SPRAYER OF BITUMEN EMULSIN RBEM-2.5

Dear friends! I would like to share some good news with you!
Our engineers have just developed and constructed a new mobile bitumen sprayer for road construction. This sprayer has been successfully tested and put into production!

SPRAYER OF BITUMEN EMULSIN RBEM-2.5

TECHNICAL DESCRIPTION
This sprayer unit is designed to diffuse hot bitumen emulsion for road construction work. The process of bitumen emulsion spraying is achieved by means of hydraulic pump, the tank for bitumen emulsion storage which can be heated due to burner.
APPLICATION

  • Road surfacing
  • For road patching
  • Sealing of cracks
  • Asphalt construction work

DRAWING

Drawing-of-sprayer-300x176

1- Lifting ear
2- Rod
3- Lever
4-Motor cover
5-Fish-rod
6-Sprayer
8- Kea pad
9- Drain cork

Properties
  1. Distribution rod
– width, m 3,6
– nozzles 8
– nozzle type hollow cone
– height from earth, mm 380
  1. Spray nozzle
– nozzle type hollow cone
– height from earth, mm 380
– length of flexible hose, м 6
  1. Full value, м³
2,8
  1. Work value,  м³
2,5
  1. Emulsion pump capacity, l/min
40
  1. Internal combustion engine
– output, kW 5
– rotation, r/min 3600
  1. The volume capacity of hydraulic oil, l
20
  1. Battery
-battery capacity, ampere hours 43
– voltage, V 12
– current, A 210
  1. Burner with LPG
– supply Liquefied gas
– numbers of torches 2
– cylinder capacity, kg 27
  1. Dimension, mm
– length in work position 4700
– length for transportation 3800
– height 1700
– width in work position 3600
– width  for transportation 1640
  1. Mass, kg
1010
  1. Mass in the filled state, kg
3510

FUNCTIN OF PUMPING UNIT
1. Tank filling.
2. Injection of emulsion on the nozzle.
3. Recycling of asphalt emulsion.
4. System flushing.

обновлено: August 29, 2017 автором: Helen Galchenko